The AEC 07 is a commercial version of the VG95234 jam nut receptacle.
The VG95234 style reverse bayonet jam nut receptacle provides increased environmental protection due to its single mounting hole. It features a low-profile nut where it is “jammed” up against a standard nut to lock the two in place. An integrated silicone O-ring offers additional sealing while the integrated splash-proof backshell provides environmental protection and strain relief.
| Insulation Resistance | -DC500V / 1000㏁ min |
|---|
| Service Rating | Test Voltage (Vrms) |
|---|---|
| Instruments | 1050 |
| A | 1600 |
| B | 4000 |
| D | 2500 |
| E | 3000 |
| Classification | Description |
|---|---|
| 00 | Wall mounting receptacle |
| 01 | Cable connecting plug |
| 02 | Box mounting receptacle |
| 05 | Dummy receptacle for panel mounting |
| 06 | Plug, Straight |
| 08 | Plug, 90° angular |
| 07A | Jam nut receptacle |
| 07G | Jam nut receptacle with RFI / EMI shielded coil within shell |
| 070A | Jam nut receptacle with rear threaded for accessories |
| 070G | Jam nut receptacle with RFI / EMI shielded coil within shell and rear threaded for accessories |
| TB | Thru-Bulkhead receptacle |
| VG Spec. | Amerline |
|---|---|
| VG95234 J/N/U/S | AEC00 |
| VG95234 F | AEC01 |
| VG95234 A/B | AEC02 |
| VG95234 G/H/L/M/R | AEC06 |
| VG95234 E/K | AEC08 |
| VG95234 C | AEC TB |
| Shell | Aluminum alloy with olive drab chromate coating over cadmium plating |
|---|---|
| Insulator Grommet | Synthetic rubber |
| Contacts | Copper alloy with silver plating |
| Classification | Description |
|---|---|
| E | Environmental connector with resilient insulators and endbell of clamp and bushing |
| F | Environmental connector with resilient insulators and endbell for flex tube |
| 00EP-TLxx | Tinel-lock adapter |
| 06EW-TLxx | Tinel-lock adapter |
| 00EP-ZLxx | Zetlock adapter |
| 06EW-ZLxx | Zetlock adapter |
| Suffix | Finish | RoHS |
|---|---|---|
| Blank | Olive Drab over Zinc (default) | |
| BLK | Black Zinc | |
| BR | Electro-deposited Black (RoHS) (500hrs salt spray test) |
 |
| BZR | Black Zinc RoHS (Black trivalent chromate over zinc plating) |
|
| EN | Electroless Nickel | |
| N | Nickel | |
| OR | Electro-deposited Olive Drab (RoHS) (500hrs salt spray test) |
|
| ODZ | Olive Drab over Zinc |
| P | Pin contact |
| S | Socket contact |
| PS | Pin at one side with socket on the side (only for TB) |
| Classification | Description |
|---|---|
| 02 | Flange with thru-holes for rear mounting (AECB00, 02E, TB) |
| 05 | Environmental connector with resilient insulators and endbell for flex tube |
| 08 | 90° angle shell with threaded holes in flange (AECB00) |
| 09 | 90° angle shell with thru-holes in flange (AECB00) |
| 15 | Endbell for shielded cables and heat shrinkable boots, AWG crimp contacts |
| 109 | Flange with threaded holes for rear panel mounting (for receptacle only) |
| F80 | AWG receptacle contacts |
| Ambient Temperature | -55℃ to 125℃ |
|---|---|
| Safety Provision | 1P 67 according to DIN 40050 (1bar pressure after 12 hrs.) |
| Vibration Test | 200㎨ (10~2000Hz) |
| Mating Life | 500 cycles minimum |
