The AEC CP is a commercial version of the VG95234 receptacle for protective caps.
This protective cap meets the latest performance requirements of the VG95234 Reverse Bayonet series. For use with circular connector plugs. These caps represent well-proven electrical capability at a competitive cost for equipment where durability is important. Tested to meet or exceed the toughest military and industrial requirements.
| Insulation Resistance | -DC500V / 1000㏁ min |
|---|
| Service Rating | Test Voltage (Vrms) |
|---|---|
| Instruments | 1050 |
| A | 1600 |
| B | 4000 |
| D | 2500 |
| E | 3000 |
| Classification | Description |
|---|---|
| 00 | Wall mounting receptacle |
| 01 | Cable connecting plug |
| 02 | Box mounting receptacle |
| 05 | Dummy receptacle for panel mounting |
| 06 | Plug, Straight |
| 08 | Plug, 90° angular |
| 07A | Jam nut receptacle |
| 07G | Jam nut receptacle with RFI / EMI shielded coil within shell |
| 070A | Jam nut receptacle with rear threaded for accessories |
| 070G | Jam nut receptacle with RFI / EMI shielded coil within shell and rear threaded for accessories |
| TB | Thru-Bulkhead receptacle |
| VG Spec. | Amerline |
|---|---|
| VG95234 J/N/U/S | AEC00 |
| VG95234 F | AEC01 |
| VG95234 A/B | AEC02 |
| VG95234 G/H/L/M/R | AEC06 |
| VG95234 E/K | AEC08 |
| VG95234 C | AEC TB |
| Shell | Aluminum alloy with olive drab chromate coating over cadmium plating |
|---|---|
| Insulator Grommet | Synthetic rubber |
| Contacts | Copper alloy with silver plating |
| Classification | Description |
|---|---|
| E | Environmental connector with resilient insulators and endbell of clamp and bushing |
| F | Environmental connector with resilient insulators and endbell for flex tube |
| 00EP-TLxx | Tinel-lock adapter |
| 06EW-TLxx | Tinel-lock adapter |
| 00EP-ZLxx | Zetlock adapter |
| 06EW-ZLxx | Zetlock adapter |
| Suffix | Finish | RoHS |
|---|---|---|
| Blank | Olive Drab over Zinc (default) | |
| BLK | Black Zinc | |
| BR | Electro-deposited Black (RoHS) (500hrs salt spray test) |
 |
| BZR | Black Zinc RoHS (Black trivalent chromate over zinc plating) |
|
| EN | Electroless Nickel | |
| N | Nickel | |
| OR | Electro-deposited Olive Drab (RoHS) (500hrs salt spray test) |
|
| ODZ | Olive Drab over Zinc |
| P | Pin contact |
| S | Socket contact |
| PS | Pin at one side with socket on the side (only for TB) |
| Classification | Description |
|---|---|
| 02 | Flange with thru-holes for rear mounting (AECB00, 02E, TB) |
| 05 | Environmental connector with resilient insulators and endbell for flex tube |
| 08 | 90° angle shell with threaded holes in flange (AECB00) |
| 09 | 90° angle shell with thru-holes in flange (AECB00) |
| 15 | Endbell for shielded cables and heat shrinkable boots, AWG crimp contacts |
| 109 | Flange with threaded holes for rear panel mounting (for receptacle only) |
| F80 | AWG receptacle contacts |
| Ambient Temperature | -55℃ to 125℃ |
|---|---|
| Safety Provision | 1P 67 according to DIN 40050 (1bar pressure after 12 hrs.) |
| Vibration Test | 200㎨ (10~2000Hz) |
| Mating Life | 500 cycles minimum |
